2017 AB Inflatables Ventus 8 VL

  • 8 ft
  • Inflatable

Overview

Ventus – Latin for “air”– is our line of lightweight tenders. With their low weight to length ratio and balanced design, Ventus boats require very little horsepower to achieve astonishing performance and speeds. They sport a full V-shape hull that runs the entire length of the boat, providing exceptional tracking and stability. Ventus models are the only lightweight boats on the market with an additional air chamber built into the hull. This air chamber makes the Ventus line extremely safe and reliable, while providing a level non-skid floor to keep your cargo and passengers dry. Ventus boats make ideal tenders with plenty of room for carrying crew and provisions.

  • Overall Length: 8' 6" / 2,60m 
  • Overall Beam: 5' 6" / 1,68m 
  • Inside Length: 5' 10" / 1,79m 
  • Inside Beam: 2’4’’ / 0,72m 
  • Tube Diameter: 16" / 0,40m 
  • Number of Chambers: 3+1 
  • Person Capacity: 4 
  • Weight: 95lbs / 43kg 
  • Recommended HP: 8hp / 6,0kw 
  • Maximum HP: 10hp / 7,5kw 
  • Shaft Length: 15" / 38,1cm 
  • RDC Design Category: C

 

Specifications

Basic Information

Manufacturer:
AB Inflatables
Model:
Ventus 8 VL
Year:
2017
Category:
Power
Boat Type:
Inflatable
Hull Material:
Fiberglass
Hull Type:
Deep Vee

Dimensions & Weight

Length:
8 ft - 2.44 meter
LOA:
8 ft 6 in - 2.59 meter
Beam:
5 ft 6 in - 1.68 meter
Draft - max:
-
Bridge Clearance:
-
Dry Weight:
95 lbs
Deadrise Aft:
-

Optional Engine

Make:
Model:
Horsepower:
8
Engine Type:
Drive Type:
Fuel Type:

Tank Capacities

Fuel Tank:
-
Fresh Water Tank:
-
Holding Tank:
-

Accommodations

Total Cabins:
-
Total Berths:
-
Total Sleeps:
-
Total Heads:
-
Captains Cabin:
No
Crew Cabins:
-
Crew Berths:
-
Crew Sleeps:
-
Crew Heads:
-

Gallery

Features

Standard Equipment

Hand Laid Fiberglass Deep “V” Hull
Stringer System Laminated into Hull
Non-Skid Rubber Floor Panels
Plastic External Transom Plate
Aluminum Internal Transom Plate with Security Lip
Stainless Steel Bow Eye
3 Stainless Steel Davit Lifting Points
Inner Hull Drain with Plug
Deck Condensation Plug
Orca (CSM) Five Layer Coated Fabric
Raised Single Rub Rail
Push Push Plastic Non-Corrosive 2 Stage Inflation Valves
1 Front & 2 Side Orca (CSM) Fabric Handles on Tubes
2 Inside Bow Sets of 2 Orca (CSM) Fabric Handles on Tubes
2 Inside Stern Single Orca (CSM) Fabric Handles on Tubes
Removable Rowing Seat
Oarlock Base
Telescopic Oars with Aluminum Shaft
Paddle Holders
Hand Pump
Maintenance Kit
Owner's Manual
Additional Air Retaining Chamber Under the Floor
3 Layers Reinforced Seams

Optional Equipment

Tube Chaps
Boat Cover
Chock Set
Bow Step with Fold Down Stainless Steel Cleat
Lateral Fold Down Stainless Steel Cleat

 

Presented by :

Our Locations :

Top